Written by Miranda Robinson, Customer Success and Agronomy Advisor at turfRad, this field report shares her firsthand experience setting up turfRad sensors at TPC Sugarloaf – from installation to actionable insights.
My first time setting up turfRad sensors from start to finish at TPC Sugarloaf felt intuitive and streamlined throughout. The equipment manager had already assembled the mounting brackets and quickly mounted the sensors on the back of the mowers. Using the turfRad app, they configured the Wi-Fi settings and set the automatic upload radius.
Pro Tip: Ensure the mower is outside with a clear view of the sky during setup so the GPS can orient properly.
We used a hotspot to provide a reliable Wi-Fi connection. Once the sensors were configured in the app, we took the mower outside the defined radius. The sensors automatically recognized the boundary, and their indicator lights turned solid, signaling they were ready to begin scanning.
The next day, the mowers went out and collected their first scans of the course. Using the scan data, we selected one high-moisture area and one low-moisture area to fine-tune the sensors for the site’s conditions. We took soil moisture meter readings in each area, and the average of those readings was used to align the sensors. This process is similar to selecting a soil type when configuring a traditional moisture meter, ensuring the turfRad system matches the property’s specific conditions.
TPC Sugarloaf is known for its tall trees, which can occasionally block the sensors’ view of the sky. When the signal is obstructed, the data scan can show a stripe pattern reflecting the difference between obstructed and clear views. In practice, we found that simply changing the mowing direction in those tree-heavy areas helped gather more complete data.
In one instance, a nearby broadcasting tower caused radio interference that showed up as an irregular section on the moisture map. Situations like this highlight the importance of interpreting data within context and the value of having a knowledgeable support team. Our tech team was able to quickly identify the cause and provide remote guidance to resolve it, ensuring accurate and reliable insights for the turf team.
While analyzing scans with Superintendent Kyle Worthy, I found it fascinating to apply these subsurface insights directly to course management. We reviewed recent drainage improvements on the scans and used that information to evaluate irrigation needs. He also identified locations where adding an extra length of drainage pipe could improve performance even further.
There were two parallel fairways, separated by housing, that each had an area performing differently from the rest of the fairway. The areas had been soil tested and thoroughly evaluated. But the turfRad scans revealed a linear pattern running through both of them – possibly the remnants of an old haul road, which Kyle had previously suspected.
The moisture mapping also supported real-time irrigation adjustments to improve turf health and playability. With thousands of moisture readings informing each scan, not only does this data help curate excellent conditions it also gives you the valuable insights to reduce the cost of water and power use.
It was a rewarding few days learning alongside Kyle Worthy, the TPC Sugarloaf team, and Alex Steudemann. I’m grateful for the opportunity to see turfRad in action and to deepen my understanding of the system. These experiences will help me better support other superintendents on their turf management journey, using the valuable insights that turfRad provides.